Solution to the Problem of Clogged Toilets When No Plunger Is Available

 

To unclog a toilet, all you need is a flange plunger, which can be purchased at any hardware shop, and two minutes of your time. If you need to clear a clogged toilet but don't have a plunger, what should you do? Perhaps you have just relocated to a brand new home. Maybe in your host's place there isn't a plunger for the toilet. Is a plunger the only tool for unclogging a toilet, or are there others?

Unclogging a toilet isn't as terrible of a process as you would think, and you won't even need a plunger to accomplish it. Surprisingly simple methods that don't use a plunger will often unclog even the worst drains.The best, most efficient ways to unclog a toilet are as follows, in the order in which they should be tried:

How to Remove a Clog from a Toilet with Warm Water

Get a big bucket and fill it halfway with hot water to start. Don't forget that you want it hot, but not boiling. Use of hot water may crack the porcelain of the toilet bowl. In its place, fill a bucket all the way up with the hottest water you can get from your sink. Fill the toilet bowl nearly all the way with the hot water and let it cool down before flushing. The high temperatures should also be adequate to break down any solid waste to the point where it can be flushed down the toilet. Avoid becoming discouraged if this doesn't work; just try something else. First, you'll need to do the so-called toilet trick, which is only the beginning. Otherwise you can choose the western Sydney plumber also.

 

The use of dish soap to unclog a toilet is recommended

Dish soap should be used in large quantities in the toilet bowl. You need a solution like Dawn that can easily cut through oil. Do not attempt to relocate it for around fifteen minutes. All solids will dissolve easier with the help of the soap. In addition, the bowl and the pipes will be lubricated, making it easier for the clog to go down the drain. You may try the "hot water approach" again after you've flushed the dish soap down the drain. After adding a pot of warm (but not boiling!) water to the bowl, let the mixture sit for another half an hour.

When the toilet is clogged, Epsom salt may help

Do you happen to have some Epsom salt on hand? If so, you're in luck. Epsom salt, when dissolved in water, triggers a chemical reaction that produces foam and bubbles. It's possible that the fizzing and bubbling might help break up the obstruction. A large amount of Epsom salt should be placed in the toilet bowl. You may try flushing it again after waiting fifteen minutes. After the first flush, positive results should become apparent. For the purpose of comprehensiveness, you may also like to combine this technique with the hot water and dish soap approach.

 

A wire hanger or a toilet brush might be used

When trying to clear anything out, this is the simplest method to use with the western Sydney plumber. If employing heat and triggering chemical reactions hasn't worked, diving in headfirst is the next logical step. When you need to clean your toilet but don't have a brush, a wire hanger may suffice in a pinch.